The light is suitable for lighting public areas, roads, sidewalks, parks and cycle paths. It meets all the requirements of the standards at unrivaled low operating costs.
Compared to other LED lights, the EV 2324 lights have the following advantages:
- they allow the installation of secondary optics on individual LEDs and thus achieve optimal radiation characteristics from covering large areas, for example, squares, to a narrow strip for intensive lighting of pedestrian crossings.
- a unique adjustable LED radiator holder. It can be adjusted in two planes from 0 to 30°. This allows you to direct the light flux to the desired area without having to tilt the entire light. This limits the creation of light smog.
- a PIR sensor can be connected to the light, which immediately switches the operating mode when people or vehicles move. For example, from minimum brightness to full power and back after a set time. An ideal solution for roads with occasional traffic, such as winter traffic on cycle paths.
- the basic prerequisite for a long life of the light is perfect heat dissipation. The body is made of aluminum alloy, which ensures perfect heat dissipation from the inside of the light to the surroundings. The light is equipped with a circuit that limits the current flowing through the LED when the internal temperature is exceeded. The entire temperature system is set to a maximum operating ambient temperature of 25°C. At this temperature, in complete silence, maximum light output is guaranteed.
- the power supply is equipped with a toroidal transformer, which, in addition to high efficiency, also ensures galvanic separation of the LED from the mains.
- the light body is equipped with filters for the drainage of condensation water.
- the almost flat glass does not create light smog and does not cause unwanted light refraction leading to glare.
Light output: 24 W
Luminous flux: 2050 lm
Color temperature: 6500 K
Mounting height: 5-7 m
Light spacing: 25 m
Power supply: 180-260V / 50-60Hz
Protection: IP65
Lifespan: 50,000 hrs. for 80% brightness reduction
Boom diameter: 35-52 mm
